NUTSERT® Rivet Fastening System

Picture
Picture

BENEFITS

  • Reduced Assembly Costs:
    Installed from one side of the workpiece.
  • Not Grip Sensitive:
    Can be used in any material thickness from .030″ through solid materials..
  • Permanent:
    Radial expansion of Nutsert
    ® provides 360° contact with parent material.
  • Portability:
    Allows installation anywhere and at any time in the assembly process.
  • Rear Protrusion:
    Reduced rear-sheet protrusion.

Picture
Features

  • Splined body improves torque-to-turn by up to 50% compared to plain body inserts
  • Improved electrical continuity in sheet metal fixings
  • Expanding style insert body can be used in any material thickness from .030” through solid materials
  • Radial expansion of Nutsert® provides 360o contact with parent material
  • Allows installation anywhere and at any time in the assembly process
  • Reduced rear-sheet protrusion
  • Low profile head results in near flush installation and clamp up

Assembly Material

  • Metal to metal

Typical Applications

  • Automotive
  • Electrical engineering
  • Electronic components
  • Sheet metal
  • Domestic appliances
  • General light fabrication
Thread Part Number Material Grip e Hole Size rec. A max. L max. M
5/16-18 09505-00400 Steel .030-.090 0.5156 0.5 0.312 0.625
4-40 09505-00400 Steel .030-.090 0.1875 0.187 0.19 0.385
4-40 09505-00400 Steel .091-.124 0.1935 0.187 0.19 0.385
4-40 09505-00400 Steel .125-.186 0.1935 0.187 0.19 0.385
4-40 09505-00400 Steel > .186 0.1935 0.187 0.19 0.385
6-32 09505-00400 Steel .030-.090 0.2187 0.219 0.19 0.385
6-32 09505-00600 Steel .091-.124 0.221 0.219 0.19 0.385
6-32 09505-00600 Steel .125-.186 0.228 0.219 0.19 0.385
6-32 09505-00600 Steel > .186 0.228 0.219 0.19 0.385
8-32 09505-00800 Steel .030-.090 0.25 0.25 0.19 0.385
8-32 09505-00800 Steel .091-.124 0.257 0.25 0.19 0.385
8-32 09505-00800 Steel .125-.186 0.2656 0.25 0.19 0.385
8-32 09505-00800 Steel > .186 0.2656 0.25 0.19 0.385
10-24 09505-01000 Steel .030-.090 0.2812 0.281 0.19 0.385
10-24 09505-01000 Steel .091-.124 0.29 0.281 0.19 0.385
10-24 09505-01000 Steel .125-.186 0.2968 0.281 0.19 0.385
10-24 09505-01000 Steel > .186 0.2968 0.281 0.19 0.385
1/4-20 09504-00800 Steel .030-.090 0.375 0.375 0.262 0.525
1/4-20 09504-00800 Steel .091-.124 0.375 0.375 0.262 0.525
1/4-20 09504-00800 Steel .125-.186 0.386 0.375 0.262 0.525
1/4-20 09504-00800 Steel > .186 0.3906 0.375 0.262 0.525
5/16-18 09504-01000 Steel .030-.090 0.5 0.5 0.312 0.625
5/16-18 09504-01000 Steel .091-.124 0.5 0.5 0.312 0.625
5/16-18 09504-01000 Steel .125-.186 0.5156 0.5 0.312 0.625
5/16-18 09504-01000 Steel > .186 0.5156 0.5 0.312 0.625
The Nutsert® threaded insert is a steel, low profile, expanding insert available in standard and metric thread sizes. An expanding insert is a single piece, which breaks into two pieces during installation. The lower threaded section of the insert draws up inside the upper sleeve section, causing the sleeve to expand 360o thus swaging the insert into the hole. Because the insert does not form a bubble on the backside of the application, an expanding insert can be used in blind hole applications. However, an expanding insert has less resistance to push out forces than a bubbling insert, which collapses into a bubble formation on the backside of the application.The low profile flange of the Nutsert® insert results in near flush installation and clamp up making it ideal for flush fitting, thin sheet and low load bearing applications. Additionally, the Nutsert® insert has small splines under the flange, which play a small role in the inserts resistance to turning in the application hole.
Picture
Picture
Picture
Picture
Picture
DEPENDENT UPON MATERIAL THICKNESS AND APPLICATION
*Notes:
1.All dimensions shown in () are millimeters, otherwise imperial.
2.Fasteneres may not perform properly if altered from the manufacturer’s as-shipped condition or installed in conditions other than specified herein.
Picture
DEPENDENT UPON MATERIAL THICKNESS AND APPLICATION
*Notes:
1.All dimensions shown in () are millimeters, otherwise imperial.
2.Fasteneres may not perform properly if altered from the manufacturer’s as-shipped condition or installed in conditions other than specified herein.
Picture
DEPENDENT UPON MATERIAL THICKNESS AND APPLICATION
*Notes:
1.All dimensions shown in () are millimeters, otherwise imperial.
2.Fasteneres may not perform properly if altered from the manufacturer’s as-shipped condition or installed in conditions other than specified herein.