Catamount® Cable Ties

Catamount’s Cable Ties are available in lengths from 4″ to our exclusive 48″ strap. Cable Ties will satisfy bundling requirements from 1/16″ to 15″ and loop tensile strengths from 18 to 175 pounds.

Cable Ties are stocked in materials and colors as listed. Contact your Catamount Distributor or Customer Service Representative for availability in special materials and colors.

Where applicable, Catamount Cable Ties are UL Recognized, Mil-Spec Approved and/or QPL Listed. State-of-the-art robotic and raw material handling equipment assures product and material integrity throughout the manufacturing process.

Overall quality is achieved through statistical analysis and quality driven operator objectives. Catamount has attained Mil-Spec I-45208 quality ratings from a number of equipment manufacturers.

Catamount Tools

New Ty-Gun™ Cable Tie Tool Attaches Cables Quickly Without Leaving Your Hands In Knots.

Thomas & Betts introduces a break-through ergonomic design that dramatically relieves stress and strain in cable tie installations. The new Ty-Gun™ cable tie tool gets the job done quickly and easily while substantially reducing the risks of carpal tunnel syndrome and other cumulative trauma disorders. The Ty-Gun™ cable tie tool is capable of tension from 18 to 120 lbs. with dramatically reduced low handle force, and provides accurate tension while cleanly cutting off the cable tie. Range of tie body width .094 to .301 inches.

Cable Tie Accessories

Mounting Pads
3/4″ and 1″ Mounts for Use with 18# through 50# Tensile Cable Ties

Mounting Cradle
Accepts Cable Ties to 50# Tensile (Miniature through Standard)

Strap Mount
For Use with Cable Ties to 175# Tensile

Low Profile Mount
Accepts Cable Ties to 50# Tensile (Miniature through Standard)

 Screw Mount
SMNY-001 Accepts Cable Ties to 50# Tensile (Miniature through Standard

Push Mounts
Versatile Push Mount for Cable Ties to 50# Tensile Strength

4-Way Mount
4-Way Screw Mounts for Cable Ties to 50# Tensile Strengt

Plain Edge Clamps
Fully Radiused Inside Edges with Size Markings in Inches and Millimeters for Easy Identification

Cable Clamps & Clips

SELF-ALIGNING CABLE CLAMPS

TAB-LOK CABLE CLAMPS

ADJUSTABLE CABLE CLAMPS

GATOR GRIP HOSE CLAMP

FLEX CLIPS

HALF CLAMP

PRESS CLIPS

HALF PRESS CLIPS

FLAT CABLE
CLIPS

FLAT CABLE SCREW CLIP

FLAT ADHESIVE CLIPS

FLAT PVC
CLIPS

Nylon Hardware

Twelve Sizes from 2-56 to 3/4-10 Threads. Threads Approximate to UNC/UNF 2B. Molded Threads Should be Tested in Application as Nylon Expands and Contracts with Moisture Content. Available in 6/6 Natural Nylon. UL Flammability 94 V-2, Non-Conductive, Non-Corrosive; Resistant to Fuels, Lubricants and most Chemicals.

HEX NUTS

STANDARD SPACERS

HEX SPACERS

STAMPED FLAT WASHERS

Wire Protection Products

For Protection of Bundles from .063″ to 7″. Install Gapped for Greater Flexibility or Butted for Maximum Abrasion Resistance, Insulation and Rigidity. Stocked in 3 Materials Including Polyethylenes and Nylon, a.k.a.: Reverse Cut, Left-Hand Cut, Counter Clockwise Cut.